Netgear n150 wireless usb adapter dirvers

Netgear N150 Wireless USB Adapter Driver Installation: A Step-by-Step Guide Without CD

Are you experiencing connectivity issues with your Netgear N150 wireless USB adapter on Windows? Installing or updating drivers can often resolve these problems and get your device back online in no time. In this article, we'll walk through the process of installing NetGear N150 Wireless USB Adapter driver without using a physical installation disc (CD).

### Step 1: Connect Your Device

Before you begin, ensure that your wireless adapter is properly connected to one of your computer's available USB ports.

### Step 2: Enable USB Devices in BIOS/UEFI Settings

If your device isn't recognized after connecting it:

* For older systems:

* Restart your computer.

* Press the corresponding key during boot (usually F1, F2, or Del) to enter the BIOS settings.

* Look for 'Peripherals' or similar and enable USB devices if they're not already enabled.

### Step 3: Install Netgear N150 Wireless USB Adapter Driver

* For newer systems with UEFI:

+ Restart your computer.

+ Press the corresponding key during boot (usually F10, Esc, or Del) to enter the BIOS/UEFI settings.

+ Navigate through the options until you reach 'Device > Internal Devices' or similar depending on your motherboard's model and manufacturer.

### Step of 4: Update Netgear N150 Wireless USB Adapter Driver

* Once inside:

* Look for 'Network' or related option, then expand it if necessary.

+ Select your adapter from the list (it should be named something like 'Realtek RTLxxxx' followed by 'Wireless-USB').

+ Click on Update/Update driver.

### Step 5: Browse and Install Driver

* A new window titled 'Windows can't find a driver for this device' will appear.

* Clicking on 'Browse...' will allow you to manually locate the correct drivers. Navigate through your computer's storage devices until you reach the location where you've extracted or saved the Netgear N150 Wireless USB Adapter drivers.

### Step 6: Select and Install Driver

* Double-click on 'Setup.exe' (or whatever is listed as a .exe file) to begin the driver installation process.

+ Follow all prompts in order. If prompted, select 'Yes' or 'Continue' when asked if you're sure about installing new drivers.

### Step 7: Restart Your Computer

* Once completed successfully, restart your computer for changes to take effect.

### Troubleshooting Tips:

If the above steps fail to resolve connectivity issues with your Netgear N150 wireless USB adapter:

1. Ensure that both your router and modem are turned on.

2 Check if any physical connections between components have become loose or damaged.

3 Disable/enable the Wi-Fi switch in your computer's network settings (Settings > Network & Internet > Ethernet, then click on 'More' next to 'Wi-Fi').

4 Restart your device again.

By following these detailed instructions and ensuring that all necessary drivers are installed correctly, you should be able to resolve any connectivity issues with your Netgear N150 Wireless USB adapter without needing a physical installation disc.

Netgear n150 wireless usb adapter dirvers